THS2标准型减振器
THS2 series standard vibration isolator
The THS2 series is a standard pneumatic vibration isolator offer fast settling time and excellent isolation performance with its special interior structures.
在垂直和水平方向提供高水平的减振性能。
THS2减振器采用两室系统，用节流孔将气室与阻尼室相连接。
两室结构能够有效衰减传递到设备的振动，使运动平台所需稳定时间降低，并且固有频率更低。
如需要较高的水平度, 可将精密调平阀（士0.05mm)安置在减振器上，减振性能更好。
在THS2系列减振器上安装内置型油阻尼，搭载运动平台的设备稳定时间得以缩短，减振器刚性提升。
Product Introduction:
THS2 series offer excellent isolation performance in both horizontal/vertical level.
The dual chamber system of THS2 consisits of an air chamber and a damping chameber connected by two orifices,which can effectively reduce the isolation transmitted, shorten the settling time of the platform and lower the Natural frequency.
If higher level of repeatability and better Isolation performance is required, the precision leveling valve with repeatability of 0.05mm can be equipped with the vibration isolation system.
THS2 pneumatic isolators incorporating the built-in oil damper can shorten the settling time of the equipment with linear stage, and increase the stiffness of the platform
